Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Managing OpenInsight IDE Settings ====== - Choose Settings, IDE Settings from the OpenInsight IDE. {{MV_089.jpg?1024x606}} {{MV_090.jpg}} Click the test run button {{MV_091.jpg}} from the Tool Bar. Type an initial value (1 – 50) for the Customerid then tab off the field. The form will display the customer information. You can also enter a new customer record by selecting a Customerid greater than 50. {{MV_092.jpg}} 5. Press the OK button on the form to save this record. The record is saved, the form is cleared. After adding or displaying the last record, choose Cancel to exit the form. This will return you to the Form Designer. guides/bfs/mv/managing_openinsight_ide_settings.txt Last modified: 2023/10/25 10:49by 127.0.0.1