FSMSG After Loading Win2K Service (AREV Specific)
At 18 APR 2002 11:16:25PM Andrew McClurg wrote:
After loading the Win2K Service Pack for Arev V2.12 onto a Win2K Server I had the FS1030 error message. After applying the SYSTEM user it resolve that error
BUT
Now when I Log into Arev i get FSMSG Line 1 B10 Variance has not been assign a value zero used.
Help!!!
Andrew
At 19 APR 2002 12:05PM [url=http://www.sprezzatura.com" onMouseOver=window.status=Click here to visit our web site';return(true)]The Sprezzatura Group[/url] wrote:
How far into the process do you get?
Have you changed to the NPP driver?
Have you set up your PIF correctly?
[i]Celebrate CeBIT with Sprezz Local![/i]
At 19 APR 2002 11:41PM a mcclurg wrote:
The process gets to the user password level. Then I put in the user password and it crashes.
The NPP is All Networks 1.5
The only PIF difference is i have /X with no /M4096 and the memory setting are 1024.
Andrew
At 20 APR 2002 11:26PM a mcclurg wrote:
FIXED. HERE IS THE PROCESS AFTER TRYING EVERYTHING.
1. logged everyone out of AREV.
2. Deleted WIN2K pack from server
3. removed SYSTEM user for ALL DRIVES
4. Rebooted Server
5. REINSTALL CLIENT DRIVERS - THIS MAY HAVE BEEN THE REAL TRICK EVENT THOUGH I HAD DONE IT ALREADY
6. Install WIN2K Pack on server
7. Install SYSTEM user on C: where service pack was and D drive where Arev was running
8. Created REVPARAM file
9. Adjusted .PIF file to match specs
10. Log into AREV 100%
Hope this helps.
Andrew McClurg