The dreaded FS466 errors (AREV Specific)
At 04 JUN 2002 12:47:31PM Warren wrote:
Continue to get these sporadically on our SWEB servers and no where else.
I tried all the recommended tweaks to the NLM and TSR as per previous discussion and KB.
I even added the /E option on the NLM in LHSTART. (Yes, I did LHSTOP and LHSTART after making the mod). No error trapping messages are being routed to the console that I have seen.
Any ideas?
At 04 JUN 2002 02:40PM [url=http://www.sprezzatura.com]The Sprezzatura Group[/url] wrote:
Warren,
What OS is on the web servers? Have you tried increasing file handles?
World Leaders in all things RevSoft
At 04 JUN 2002 04:14PM ralph johler wrote:
Check your useage on your Netware user count. If you are hitting the limit on your Netware, I've seen the FS466 message appear when the user(s) over the Netware limit try and log onto the Arev, even when there are Arev license counts available. This occurred because the users where authenticating to the Netware server with the Arev database, which is where the Netware license limit was being exceeded.
This would only apply if you are receiving the errors when the S/Web server session is being started.
At 06 JUN 2002 11:51AM Warren wrote:
Should be Win98. I will try increasing FILES. We have 3 SWeb servers running 2 SWeb session each.
We get less errors after the tweaks, maybe once a week, down from 2 or 3 times a week. Seldom do we get errors on both sessions on a single server/workstations, but it does happen.
At 06 JUN 2002 12:12PM Warren wrote:
'K, was set to Windows default (i.e no FILES parameter at all.)
Set to FILES=200 now. We'll see what effect that has.
At 25 JUN 2002 11:30AM Warren wrote:
Well FILES=200 did not seem to resolve the problem. I suppose I can up the retry parameters some more on the TSR/NLM.
FWIW the error seems to always be during reads of object code: either from SYSOBJ, application programs, ! records, etc. I don't recall the read error occuring on 'data'.