WINFRAME, NT SERVER, and AREV 3.12 (AREV Specific)
At 23 OCT 1997 11:33:59AM Wayne Curzadd wrote:
We have clients using WINFRAME as a remote access server to applications. The problem is extremely slow response time. The following is a typical installation:
AREV 3.12
NPP 1.4
NT Server 3.51 or 4.0, Service packs current
Highend Server Hardware w/RAID 5 Disk subsystems
NT Service 1.1
Citrix WINFRAME connecting via WAN over 128KB data lines to foreign sites.
When connecting over LAN to WINFRAME box performance is fine. When connecting internationally via 128KB connect, performance is unacceptable. Just one connect at a time proved unacceptable response. Prompt to prompt after enter key was pressed is 5 seconds. The same connection using PC Anywhere is more than adequate at 14.4KB or 19.6KB. This would lead me to beleave there is a configuration problem on the WINFRAME box.
Does anyone have experience in making this work adequately? These clients must centralize an application running from sites all over the world.
Thanks,