REVMEDIA OPEN ERROR FS472 (AREV Specific)
At 16 JUL 1999 06:09:26PM Brenda Gray wrote:
LHIPX DRIVE REVMEDIA OPEN ERROR FS472- UNABLE TO OPEN BOOT MEDIA MAP
At 17 JUL 1999 06:00AM Tony Marler @ Prosolve Software wrote:
Brenda
FS472 is ussually due to frame type problems. If using Win95 then choose a specific frame type in network settings rather than Auto. Also this is a good time to get rid of unnecessary bindings on the Netware server.
In many instances Ethernet 802.2 is all that is needed the others are generally for historical purposes or wide area connectivity.
Tony
At 19 JUL 1999 09:48AM steve wrote:
If setting the Frame Type to a pre-determined value doesn't work (it does about 85% of the time in our experience) you might try deselecting the check box for Primary Logical Board on that same window (IPX 32-bit client for Novell Netware - Advanced IPX). We've found that usually solves the problems not fixed by frame-type alone. I'm not sure why this works, but it does.
At 20 JUL 1999 10:32AM Victor Engel wrote:
I have found that we get this if the server is rebooted. The solution is to get a fresh connection on the workstation, i.e., log off and back on again or restart the workstation.