Errors with SUSPEND (AREV Specific)
At 27 JUL 2005 07:46:27AM Simon G Wilmot wrote:
I have recently made an amendment to the system which involved shelling the Suspend command. An error has recently come to light that seems to be the same after restoring everything as it was before the changes.
Situation - from TCL type suspend.
In Dos type Set
and then type Exit.
At this point we get an error when trying to return to ARev.
Error Msg W186
An error has occurred during the "SUSPEND" operation.
STATUS() is undefined code "1".
Ok this and another error appears
Error Msg FS133
Ubdefined error during a read/write/delete operation.
OS File : 4
Status():
Had anyone got any ideas ???
Thanks in anticipation,
Simon
At 27 JUL 2005 11:55AM Victor Engel wrote:
I have seen this with all versions of Arev. You may want to read this article:
http://www.revelation.com/__85256DB80017688B.nsf/0/74E93500C3B4AFFC852564BC00480815?OpenDocument
or you can simply edit the sysmessages record for the error message and change the first line to N to keep it from displaying. I've never seen a situation where control didn't eventually go back to Arev after displaying the error.
Victor
At 27 JUL 2005 11:55AM Warren Auyong wrote:
Check the environment setting as to the location of the suspend file.
Make sure it is unique for each user and that the user has create/read/modify/delete rights to that file or directory.
The rollout/suspend file can be specified dynamically with the TCL ROLLOUT command.