GFE on files shared bt NT and 3.11 machines? (OpenInsight Specific)
At 27 APR 1998 10:27:32AM Steve C. wrote:
I seem to be getting sporatic FS126 ;* 2 Group format error wrong
ov frame linked to group.
Could this be because some users, on a netware LAN, are on
WinNT machines and some are on Win 3.11???
The above GFE FS126 doesn't seem to allow me to fix the GFE through
the Database Manager ….any suggestions??
Using OI3.5
Thanks…
Steve C.
At 27 APR 1998 10:47AM Tracy Graves wrote:
Steve-
There shouldn't be any conflicts that I know of as a result of the mixed workstations. Are the GFE's occurring on the same tbales, or is it random tables, random times? Can you run the FIX_LH subroutine? The parameters should be detailed in the help file.
Tracy Revelation
At 27 APR 1998 11:07AM Steve C. wrote:
Tracy,
When I run Fix_LH I get the message:
FS200: The "FB_INSPECTIONS" table is not available.
The file is attached, I can bring up the Dict. in table builder,
but I can not run any Forms that use this Table.
Steve C.
P.S. In DM when I run LH_verify it shows the error
FS126 ;* 2 Group format error wrong ov frame linked to group.
but the FixGFEs button is grayed out and the Detail button shows
that the "testing status" is "Good". I'm really stumped on this one.
At 27 APR 1998 11:33AM Steve C. wrote:
Tracy,
I also can't "Sync Database" from the Development menu.
It seems to get about 1/3 through the Removing section
and then aborts.
Steve C.
At 27 APR 1998 02:27PM Steve C. wrote:
Tracy,
I fixed it. For your future ref:
]When I run Fix_LH I get the message:
]FS200: The "FB_INSPECTIONS" table is not available.
]The file is attached, I can bring up the Dict. in table builder,
]but I can not run any Forms that use this Table.
]In DM when I run LH_verify it shows the error
]FS126 ;* 2 Group format error wrong ov frame linked to group.
]but the FixGFEs button is grayed out and the Detail button shows
]that the "testing status" is "Good". I'm really stumped on this one.
***
I did a LH_verify on the !Filename, i.e. Index file.. and there was
the actual GFE. I hit the FixGFEs button and fixed it. Then just for luck I remove the indexes on Filename and then added them back in.
And it worked!!!!!!
Steve C.
At 27 APR 1998 11:07PM Cameron Revelation wrote:
Steve,
Your LH tables are on a Netware server and the workstations are mixed Win NT and 3.11? Are you using the NLM? (Highly suggested.) Do you have the latest client32 installed on the NT workstations?
Cameron Purdy
Revelation Software