VREPAIR and AREV problems... (AREV Specific)
At 06 APR 1998 09:40:33AM Kevin Wood wrote:
I have this little problem with AREV every time I run VREPAIR on the volume containing our application. After running VREPAIR, AREV will not execute. When I try to run it I get this error:
Linear Hash IPX Driver - REVMEDIA OPEN Error FS472
Unable to Open Boot Media Map
I have to restore from backup to get it to work. The first couple of times I only had to restore the files in the root directory but yesterday I had to restore the entire application (although this may have been a fluke because I still had to down the server and reboot the workstation before it would work). Any thoughts on this? I am using the 1.1 NLM on Novell 4.11 with AREV 3.03.
TIA,
kevin
Network Manager
Tri-Center Computer, Inc.
At 06 APR 1998 06:07PM Steve Smith wrote:
Check that
(a) everyone is off the server before running vrepair (no background indexing workstation, print servers, etc.)
(b) all files after running vrepair have a Novell owner. NDIR /A gives this to you in Novell 3.x
© you run vrepair continually until you get *two* error-free passes, then restart the server
(d) that all non-Novell nlm's are unloaded prior to running vrepair
Hope this helps
Steve