What do I have to do in order to fax from the Revelation Reporter. I have tried 4 different software packages and they all do the some thing.

When I change the printer driver to print to the fax instead of a printer the print gets large, I mean really large.

For what it is worth, I fought this one a few years ago and ended up making a repost specifically for the fax where the type was teeny tiny so it would fax at the size I wanted…I hope someone has a better solution by now. I'm assuming you have gone through the printer setup in reporter, etc.. [email protected]

ARCS, Inc. [img]http://www.arcscustomsoftware.com/arcslogo.gif[/img] </QUOTE> ---- === At 10 JUN 1999 12:29AM Donald Bakke wrote: === <QUOTE>Kevin & Paxton, This is usually a problem when you are changing the printer from the default to another while already in the Reporter. FYI, many applications have similar problems when you switch printers this way. The work around is to set the fax driver as the default printer prior to launching the report. If you want to automate this somehow you can programmatically switch the default printer to the fax driver so the end user won't have to go through the motions. You can then switch the driver back again to save them that step as well. If this is something you are interested in then look at the code behind the PRINTSETUP utility in SYSPROG and you will see how it's done. [email protected] [url=http://www.srpcs.com]SRP Computer Solutions

View this thread on the Works forum...