OEngineServer on GoogleCloud (OpenInsight 64-bit)
At 26 NOV 2019 07:05:58PM Barry Stevens wrote:
On GoogleCloud server trying to debug start of OEngineServer error.
do: (CD - OI10 folder)
java –jar oesocketserver.jar –d 3
get this:
Error: Could not find or load main class ?jar
What would be the cause of this error?
At 26 NOV 2019 09:10PM bshumsky wrote:
On GoogleCloud server trying to debug start of OEngineServer error.
do: (CD - OI10 folder)
java –jar oesocketserver.jar –d 3
get this:
Error: Could not find or load main class ?jar
What would be the cause of this error?
Hi, Barry. In the line you transcribed - or copied? - you have some odd characters. Is this an actual copy/paste of the command you were trying to issue? If so, perhaps the problem is that you don't have an actual dash in front of the word "jar." Please type in (NOT copy and paste in) the following line:
java -jar oesocketserver.jar -d 3
Do you see the same error?
- Bryan Shumsky
At 26 NOV 2019 11:41PM Barry Stevens wrote:
I copied an ran what you posted and it ran through.
I copied\pasted from the OI pdf document
I now get
Unable to access LH files
error=FS1020
At 27 NOV 2019 04:12PM Barry Stevens wrote:
Figured it all out.
All good so far.
At 27 NOV 2019 04:28PM Barry Stevens wrote:
Well, that didn't last long.
I think I am a bit out of my league here.
Google cloud server running Windows Server 2019 3.5gb ram
Openinsight 10.7
OI wont start.
Event viewer shows:
Faulting application name: OpenInsight.exe, version: 1.0.0.1636, time stamp: 0x5d6e546a
Faulting module name: RevRCL.dll, version: 5.2.0.13, time stamp: 0x5cb48a72
Exception code: 0xc0000005
Fault offset: 0x0000000000002912
Faulting process id: 0x13ec
Faulting application start time: 0x01d5a5681b03d47d
Faulting application path: C:\OI10FMWebService\OpenInsight.exe
Faulting module path: C:\OI10FMWebService\RevRCL.dll
Report Id: b3fe6566-bed7-48d7-8309-16b5a4534ae1
Faulting package full name:
Faulting package-relative application ID:
At 02 DEC 2019 09:25AM bshumsky wrote:
Hi, Barry.
It looks like both the OEngines (from the now-working engine server) and OpenInsight itself are having problems running the "communication" portion. Are you running with a UD service? Where is that installed? Is it successfully running?
Thanks,
- Bryan Shumsky
At 02 DEC 2019 03:30PM Barry Stevens wrote:
»Are you running with a UD service?
YES v5.2
Where is that installed?C:\Revsoft\Universal Driver 5.2
Is it successfully running?Yes
At 02 DEC 2019 03:42PM Barry Stevens wrote:
Revparam has:
ServerOnly=1NamedPipeName=LH52SRVCStopped the LH Service
Changed Revparam to ServerOnly=0
run and got msg:
[Universal Driver 5.2.0.0]>Unable to access LH FilesError=FS1020
At 05 DEC 2019 08:12AM bshumsky wrote:
Revparam has:
ServerOnly=1NamedPipeName=LH52SRVCStopped the LH Service
Changed Revparam to ServerOnly=0
run and got msg:
[Universal Driver 5.2.0.0]>Unable to access LH FilesError=FS1020</QUOTE>Hi, Barry. So just to be clear, "regular" desktop OI doesn't run on this system either, and generates this error?
Is it possible that antivirus has "blocked" the LH files from running? If you remove the NamedPipeName from the REVPARAM does it make any difference (I don't expect it to, but let's start with a clean REVPARAM that ONLY has "ServerOnly=0" in it)
- Bryan Shumsky
=== At 05 DEC 2019 03:35PM Barry Stevens wrote: ===
Did all that, no difference.
Don't worry, ran out of my 'free' time, so will leave it now as it there was not a serious application need, just seeing if I could do it (Big fail).
Wait until I can get a cloud expert to sit with me to setup - might do AWS next time.
Thanks for you help.