OINSIGHT.exe app crash (Server Setup)
At 17 NOV 2022 11:02:16PM Barry Stevens wrote:
A client is transfering their OI system from one hosted sight to another.
The system has been copied to the NEW server.
I am running OI onsite on the hosted server sit.
I can run OI and get my MDI menu.
I can run reports.
I can open an EQUIRY form ok BUT when I open an ENTRY form - OI Crashes and below is the event log entry.
I have looked at all the setups that I can think of SYSTEM user access all users write access.
no revparam (that another issue)
Log Name: Application
Source: Application Error
Date: 18/11/2022 1:07:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: PARKTRENT-DC1.PARKTRENT.local
Description:
Faulting application name: OINSIGHT.exe, version: 9.3.2.0, time stamp: 0x4ffc5035
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Fault offset: 0x0052a268
Faulting process id: 0x814
Faulting application start time: 0x01d8faf225c98010
Faulting application path: E:\PMS\OINSIGHT.exe
Faulting module path: unknown
Report Id: ba797c2a-2fbe-44b0-8617-fef4ef8bbba8
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System><Provider Name="Application Error" /><EventID Qualifiers="0">1000</EventID><Level>2</Level><Task>100</Task><Keywords>0x80000000000000</Keywords><TimeCreated SystemTime="2022-11-18T02:07:18.831004400Z" /><EventRecordID>1885</EventRecordID><Channel>Application</Channel><Computer>PARKTRENT-DC1.PARKTRENT.local</Computer><Security /></System><EventData><Data>OINSIGHT.exe</Data><Data>9.3.2.0</Data><Data>4ffc5035</Data><Data>unknown</Data><Data>0.0.0.0</Data><Data>00000000</Data><Data>c000041d</Data><Data>0052a268</Data><Data>814</Data><Data>01d8faf225c98010</Data><Data>E:\PMS\OINSIGHT.exe</Data><Data>unknown</Data><Data>ba797c2a-2fbe-44b0-8617-fef4ef8bbba8</Data><Data></Data><Data></Data></EventData></Event>
At 18 NOV 2022 03:09PM Barry Stevens wrote:
What logfile should I create to see where this is occuring?
At 19 NOV 2022 07:55AM Karl Pozmann wrote:
I've been having a similar experience moving my client from Server 2012 R2 to Windows 11 Pro. Did you remember to move the linear hash service from the old server if it was running there? That's what I neglected to do and will install it today on the 11 pro machine - Bryan Shumsky was key to helping me figure that out as I clearly had NO memory of ever installing it on the old server.
Also, if you go to my post on the 16th you'll see Andrew helping out. Per Andrew, you can start a log by:
"In the OI subdir create a blank text file called oeprofile.log. When you start OI (which will run a LOT slower) it will add all calls to oeprofile_processId.log. The last entry in the log will be where OI terminated."
In any event, I hope to solve the problem my client is having by moving the linear hash service today. I have emails from Bryan to help along those lines if you need it.
At 19 NOV 2022 03:17PM Barry Stevens wrote:
I've been having a similar experience moving my client from Server 2012 R2 to Windows 11 Pro. Did you remember to move the linear hash service from the old server if it was running there? That's what I neglected to do and will install it today on the 11 pro machine - Bryan Shumsky was key to helping me figure that out as I clearly had NO memory of ever installing it on the old server.
Also, if you go to my post on the 16th you'll see Andrew helping out. Per Andrew, you can start a log by:
"In the OI subdir create a blank text file called oeprofile.log. When you start OI (which will run a LOT slower) it will add all calls to oeprofile_processId.log. The last entry in the log will be where OI terminated."
In any event, I hope to solve the problem my client is having by moving the linear hash service today. I have emails from Bryan to help along those lines if you need it.
@KarlPozmann
Yes LH Service was re-installed on the new server
Thanks for the info re oeprofile.log - that will help a lot.
I will also do a LH verify on ALL tables, just in case there was an issue in the transfer.
thank you. (I will check out your posting)
At 21 NOV 2022 12:08AM Barry Stevens wrote:
I've been having a similar experience moving my client from Server 2012 R2 to Windows 11 Pro. Did you remember to move the linear hash service from the old server if it was running there? That's what I neglected to do and will install it today on the 11 pro machine - Bryan Shumsky was key to helping me figure that out as I clearly had NO memory of ever installing it on the old server.
Also, if you go to my post on the 16th you'll see Andrew helping out. Per Andrew, you can start a log by:
"In the OI subdir create a blank text file called oeprofile.log. When you start OI (which will run a LOT slower) it will add all calls to oeprofile_processId.log. The last entry in the log will be where OI terminated."
In any event, I hope to solve the problem my client is having by moving the linear hash service today. I have emails from Bryan to help along those lines if you need it.
@KarlPozmann
Yes LH Service was re-installed on the new server
Thanks for the info re oeprofile.log - that will help a lot.
I will also do a LH verify on ALL tables, just in case there was an issue in the transfer.
thank you. (I will check out your posting)
Here is the end of the oeprofile.log
Running a form.
A debug in the commuter module shows that it never gets there.
RTP26 16781 0
PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0UTILITY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781New server setup.
hosted server - server info that I can see:
Microsoft Windows server 2019 standard
Hardware: VMware - VmWare virtual platform
memory = 4GB
I also see an icon the the server access desktop that says 'FileZilla server'
Dialog box form and readonl Enquiry forms run but 'write forms crash.
Cant run clientsetup
Install of SRPEditor shows no buttons , just white areas.
Copied from my PC where all was working perfect.
Strange stuff and I am sure something in their setup is wrong, but, I cant tell them what is the issue as I am way out of my league.
PS: Just quietly I dont see that these guys have a lot of experience in this area.
At 21 NOV 2022 12:13AM Barry Stevens wrote:
I've been having a similar experience moving my client from Server 2012 R2 to Windows 11 Pro. Did you remember to move the linear hash service from the old server if it was running there? That's what I neglected to do and will install it today on the 11 pro machine - Bryan Shumsky was key to helping me figure that out as I clearly had NO memory of ever installing it on the old server.
Also, if you go to my post on the 16th you'll see Andrew helping out. Per Andrew, you can start a log by:
"In the OI subdir create a blank text file called oeprofile.log. When you start OI (which will run a LOT slower) it will add all calls to oeprofile_processId.log. The last entry in the log will be where OI terminated."
In any event, I hope to solve the problem my client is having by moving the linear hash service today. I have emails from Bryan to help along those lines if you need it.
@KarlPozmann
Yes LH Service was re-installed on the new server
Thanks for the info re oeprofile.log - that will help a lot.
I will also do a LH verify on ALL tables, just in case there was an issue in the transfer.
thank you. (I will check out your posting)
Here is the end of the oeprofile.log
Running a form.
A debug in the commuter module shows that it never gets there.
RTP26 16781 0
PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0UTILITY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781New server setup.
hosted server - server info that I can see:
Microsoft Windows server 2019 standard
Hardware: VMware - VmWare virtual platform
memory = 4GB
I also see an icon the the server access desktop that says 'FileZilla server'
Dialog box form and readonl Enquiry forms run but 'write forms crash.
Cant run clientsetup
Install of SRPEditor shows no buttons , just white areas.
Copied from my PC where all was working perfect.
Strange stuff and I am sure something in their setup is wrong, but, I cant tell them what is the issue as I am way out of my league.
PS: Just quietly I dont see that these guys have a lot of experience in this area.
At 21 NOV 2022 05:00AM Carl Pates wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
At 21 NOV 2022 10:00AM Donald Bakke wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
Barry - With the SRP Editor, do the buttons do anything when you click them? If so, then this is an image loading problem and we often see this with configurations that are not configured to support 32bit color. If not, then this is a control registeration problem and seems to line up with your ClientSetup.exe installation issues.
At 21 NOV 2022 03:35PM Barry Stevens wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
Barry - With the SRP Editor, do the buttons do anything when you click them? If so, then this is an image loading problem and we often see this with configurations that are not configured to support 32bit color. If not, then this is a control registeration problem and seems to line up with your ClientSetup.exe installation issues.
Thanks for the input.
I did an clean install of OI (run as admin) to another folder and my app is now working on the server.
Next is to setup running on the terminal server (as the users will be) - but, as usual!! - I dont see the applications folder - here we go again.
Never had this trouble before - I just say copy to the server and run the LHService install and never hear from again. And right+Click run as admin on firsttime workstations shortcut (I do all the reg registraiions in startup)
The SRP Editor are just blanks, not a button. It is not a deal breaker - just for my own use - not the users. But I will keep plugging.
At 23 NOV 2022 02:51PM Barry Stevens wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
@CarlPates
here is the end of the log from further up.
START_WINDOW 16781 281
PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0RTP26 16781FIND_LOCALE_FORMAT 16781GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0FIND_LOCALE_FORMAT 16781 0RTP26 16781 0PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0UTILITY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781Just had a though - I wonder if there is an issue with port 777 comunication - or would I not be seeing data in other , non data entry forms and reports.
I will email you the log file. With the subject as this forum posting subject
At 23 NOV 2022 02:53PM Barry Stevens wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
@CarlPates
here is the end of the log from further up.
START_WINDOW 16781 281
PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0RTP26 16781FIND_LOCALE_FORMAT 16781GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0FIND_LOCALE_FORMAT 16781 0RTP26 16781 0PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0UTILITY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781Just had a though - I wonder if there is an issue with port 777 comunication - or would I not be seeing data in other , non data entry forms and reports.
I will email you the log file. With the subject as this forum posting subject
At 23 NOV 2022 09:29PM Barry Stevens wrote:
Barry,
"Cant run clientsetup"
Some sort of rights issue?
"Install of SRPEditor shows no buttons , just white areas."
Does it use image files? If so are they physically present? If so - what are the rights in that folder?
The "end" of the profile log isn't telling much there. The process dies in a call to Utility, after a call to ps_Get_Property, after a call to RTP26 (Oconv). More than likely this will happen in a system handler, but you need to look back up the log to try and identify what system handler is running, and what your app was doing to trigger it.
Not much more I can tell you I'm afraid - that server looks like it's locked down too tight.
@CarlPates
here is the end of the log from further up.
START_WINDOW 16781 281
PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0RTP26 16781FIND_LOCALE_FORMAT 16781GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0GETLOCALEINFO 16781GETLOCALEINFO 16781 0FIND_LOCALE_FORMAT 16781 0RTP26 16781 0PS_GET_PROPERTY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781OEREQINFO 16781 0REQUEST_INFO 16781 0PS_GET_PROPERTY 16781 0UTILITY 16781REQUEST_INFO 16781BLD_TEMPLATE 16781BLD_TEMPLATE 16781 0OEREQINFO 16781Just had a though - I wonder if there is an issue with port 777 comunication - or would I not be seeing data in other , non data entry forms and reports.
I will email you the log file. With the subject as this forum posting subject
and this is an extract of the log from my PC, at the same point, where it goes further and the form does display:
START_WINDOW 35000 297
PS_GET_PROPERTY 35000REQUEST_INFO 35000BLD_TEMPLATE 35000BLD_TEMPLATE 35000 0OEREQINFO 35000OEREQINFO 35000 0REQUEST_INFO 35000 0PS_GET_PROPERTY 35000 0RTP26 35000FIND_LOCALE_FORMAT 35000GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0GETLOCALEINFO 35000GETLOCALEINFO 35000 0FIND_LOCALE_FORMAT 35000 0RTP26 35000 0PS_GET_PROPERTY 35000REQUEST_INFO 35000BLD_TEMPLATE 35000BLD_TEMPLATE 35000 0OEREQINFO 35000OEREQINFO 35000 0REQUEST_INFO 35000 0PS_GET_PROPERTY 35000 0UTILITY 35000REQUEST_INFO 35000BLD_TEMPLATE 35000BLD_TEMPLATE 35000 0OEREQINFO 35000OEREQINFO 35812 812REQUEST_INFO 35812 812UTILITY 35812 812GET_STATUS 35812GET_STATUS 35812 0GET_PROPERTY 35812UNASSIGNED 35812UNASSIGNED 35812 0GET_PROPERTY 35812 0PS_GET_PROPERTY 35812REQUEST_INFO 35812BLD_TEMPLATE 35812BLD_TEMPLATE 35812 0OEREQINFO 35812OEREQINFO 35812 0REQUEST_INFO 35812 0
At 24 NOV 2022 06:24PM Barry Stevens wrote:
A client is transfering their OI system from one hosted sight to another.
The system has been copied to the NEW server.
I am running OI onsite on the hosted server sit.
I can run OI and get my MDI menu.
I can run reports.
I can open an EQUIRY form ok BUT when I open an ENTRY form - OI Crashes and below is the event log entry.
I have looked at all the setups that I can think of SYSTEM user access all users write access.
no revparam (that another issue)
Log Name: Application
Source: Application Error
Date: 18/11/2022 1:07:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: PARKTRENT-DC1.PARKTRENT.local
Description:
Faulting application name: OINSIGHT.exe, version: 9.3.2.0, time stamp: 0x4ffc5035
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Fault offset: 0x0052a268
Faulting process id: 0x814
Faulting application start time: 0x01d8faf225c98010
Faulting application path: E:\PMS\OINSIGHT.exe
Faulting module path: unknown
Report Id: ba797c2a-2fbe-44b0-8617-fef4ef8bbba8
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System><Provider Name="Application Error" /><EventID Qualifiers="0">1000</EventID><Level>2</Level><Task>100</Task><Keywords>0x80000000000000</Keywords><TimeCreated SystemTime="2022-11-18T02:07:18.831004400Z" /><EventRecordID>1885</EventRecordID><Channel>Application</Channel><Computer>PARKTRENT-DC1.PARKTRENT.local</Computer><Security /></System><EventData><Data>OINSIGHT.exe</Data><Data>9.3.2.0</Data><Data>4ffc5035</Data><Data>unknown</Data><Data>0.0.0.0</Data><Data>00000000</Data><Data>c000041d</Data><Data>0052a268</Data><Data>814</Data><Data>01d8faf225c98010</Data><Data>E:\PMS\OINSIGHT.exe</Data><Data>unknown</Data><Data>ba797c2a-2fbe-44b0-8617-fef4ef8bbba8</Data><Data></Data><Data></Data></EventData></Event>
I think what I am about to point out is all related to some sort of access issue, but dont know where:
1. FYI:
I have found that the forms in question all have ole controls for ChadoSpellText.SpellText tat uses ChadoSpellText.ocx and it get registered with on OK message.
2. Which is where Rev might help
I ran SRPUtilitis and in the proggress log dialg I saw this:
RevCAPI ERROR: Unable to locate server
Can you shed light on what it is trying to do and where abouts on a Server 2019 it might be getting blocked (or most likly a missed server setup action)
TIA
At 29 NOV 2022 12:42AM Barry Stevens wrote:
A client is transfering their OI system from one hosted sight to another.
The system has been copied to the NEW server.
I am running OI onsite on the hosted server sit.
I can run OI and get my MDI menu.
I can run reports.
I can open an EQUIRY form ok BUT when I open an ENTRY form - OI Crashes and below is the event log entry.
I have looked at all the setups that I can think of SYSTEM user access all users write access.
no revparam (that another issue)
Log Name: Application
Source: Application Error
Date: 18/11/2022 1:07:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: PARKTRENT-DC1.PARKTRENT.local
Description:
Faulting application name: OINSIGHT.exe, version: 9.3.2.0, time stamp: 0x4ffc5035
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Fault offset: 0x0052a268
Faulting process id: 0x814
Faulting application start time: 0x01d8faf225c98010
Faulting application path: E:\PMS\OINSIGHT.exe
Faulting module path: unknown
Report Id: ba797c2a-2fbe-44b0-8617-fef4ef8bbba8
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System><Provider Name="Application Error" /><EventID Qualifiers="0">1000</EventID><Level>2</Level><Task>100</Task><Keywords>0x80000000000000</Keywords><TimeCreated SystemTime="2022-11-18T02:07:18.831004400Z" /><EventRecordID>1885</EventRecordID><Channel>Application</Channel><Computer>PARKTRENT-DC1.PARKTRENT.local</Computer><Security /></System><EventData><Data>OINSIGHT.exe</Data><Data>9.3.2.0</Data><Data>4ffc5035</Data><Data>unknown</Data><Data>0.0.0.0</Data><Data>00000000</Data><Data>c000041d</Data><Data>0052a268</Data><Data>814</Data><Data>01d8faf225c98010</Data><Data>E:\PMS\OINSIGHT.exe</Data><Data>unknown</Data><Data>ba797c2a-2fbe-44b0-8617-fef4ef8bbba8</Data><Data></Data><Data></Data></EventData></Event>
I think what I am about to point out is all related to some sort of access issue, but dont know where:
1. FYI:
I have found that the forms in question all have ole controls for ChadoSpellText.SpellText tat uses ChadoSpellText.ocx and it get registered with on OK message.
2. Which is where Rev might help
I ran SRPUtilitis and in the proggress log dialg I saw this:
RevCAPI ERROR: Unable to locate server
Can you shed light on what it is trying to do and where abouts on a Server 2019 it might be getting blocked (or most likly a missed server setup action)
TIA
The issue was DEP!!!